Balance for weighing vehicles - types, installation. : Structurally electronic truck scales are divided into two groups: stationary and mobile. Mobile scales represent the construction of several weight-measuring modules and the electronic terminal. Used as a rule for weighing vehicles in parts. There are mortise and skid performance. Platform scales, working in a mode of long-term operation. In turn, divided into without foundation and foundation, auto scales for weighing vehicles and the entire poosnogo scales for weighing. When measuring the weight of vehicles on the axes of the addition is performed readings of measurements of each element. Auto scales may consist of one or more load-bearing modules, interconnected. This design makes easy installation of weights and promotes long-term reliable operation. For all the cars weight is characterized by higher requirements for entrance. Place to install car weights should be a straight section of road sections before and for the weights should be the same height. The installation of dynamic avtovesov characterized by higher requirements: direct plot, without bends, the deviation is not more than 2%. Various sizes of platform modules allow to produce one-and a lot of cars, platform scales meet the requirements for measuring the weight of a concrete road. At the car balance, with a length of 2.6 meters platform, vehicles are weighed in two stages, and the total weight of the machine is calculated as the sum of weighing axle vehicle. Reason for car weights with a long platform must meet high standards. To ensure the stability of the testimony of the platform car weights should be rigid and prevent sag. Domestic car without foundation scales may be used on regular asphalt. This installation time is reduced by several times and reduces the cost of preparing the foundation. Such auto scales are mobile and allow to change the place of use car weights.