The destruction of metal and concrete structures under the influence of corrosion - an issue that worries many. How not to make a mistake in choosing to rust? What does the modern market protection against corrosion? Many years of research in this area led to the emergence of Ceram-Kote - two-component ceramic coating on the basis of a special composition of epoxy resins. It consists of inert ceramic microparticles, each of which is enclosed in resin, which provides a very dense and elastic layer with high resistance. A short time, a unique material, Ceram-Kote subdued consumers around the world, and this is the explanation. Coverage Ceram-Kote is easy to use - if you wish, you can cause even a roller or brush. Moreover, in contrast to many analogues, Ceram-Kote does not require priming the surface - it is applied directly to metal. This leads to a decrease in time and money and a significant increase in productivity. As a result, coverage was cheaper foreign-LC system at 16.7%, and more expensive than domestic by 6,5%. Durability pleasant surprise: antirust paint Ceram-Kote is from two to five times longer than conventional paint systems with the same thickness. The advantages of Ceram-Kote also include: high strength adhesion to the surface (adhesion), resistance to impact, abrasion and chemical influences, very good elasticity and low vlagopronitsaemost (100 times smaller than conventional paint systems with equivalent thickness). Coverage Ceram-Kote certified and authorized for use in tanks with drinking water. It is safe for the environment, as it contains no solvents. For decades covering protects machines and equipment of oil, gas and chemical industry, shipbuilding, aircraft and instrument. Also, Ceram-Kote is used in power plants, sanitary systems, mining, food processing, paper industry. Get more information and to purchase coverage Ceram-Kote can be from an authorized representative of the company «Ceram-Kote»